一、路面的材料
1、 Pavement materials
在路面的规定上，就一定要留意静电感应(是一种处在静止不动情况的电荷)难题，因此人们要用环氧树脂(Oxygen)自流平地坪漆或是是耐磨损耗性强的那类塑胶（构造:树脂材料、阻燃剂、增稠剂、染料)木地板，才可以做到抗静电的规定。
In terms of road surface regulations, we must pay attention to the problem of electrostatic induction (which is a kind of static charge). Therefore, people should use epoxy resin (oxygen) self leveling flat paint or plastic (structure: resin material,
flame retardant, thickener, dye) wood floor with strong wear resistance, so as to achieve the anti-static regulation.
二、墙壁顶端的材料
2、 Material at the top of the wall
墙壁和顶端材料的规定是一样的，因此人们放进一起来看。这两一部分一般的规定是应用五十mm厚的夹心巧克力采厚钢板来建造的，那样的材料有许多优势，其一是能够具有优良的隔热保温实际效果，其二是美观大方安裝起來非常容易，其三就是说牢固。此外墙壁上安裝的对话框一般也规定选用空气氧化（oxidation)铝材料的工艺品来建造。
The rules for the wall and the top material are the same, so people put it together. These two parts of the general provisions are to use 50 mm thick sandwich chocolate thick steel plate to build, such materials have many advantages, one is that it can
have excellent thermal insulation effect, the other is beautiful, easy to install, and the third is firm. In addition, the dialog box installed on the wall is generally stipulated to be made of air oxidation aluminum materials.
三、排风管路的材料
3、 Material of exhaust pipe
净化无尘车间是必须下设排风管路设备的，这一设备针对净化无尘车间来讲很关键，他一般规定用热浸镀锌(galvanization)(zinc)板(Zinc coated steel)来铺装，可是这还不算是进行，铺装完以后也要贴上阻燃性PF聚氨酯发泡塑料(关联事情:塑胶)板，目地是用以净化和隔热保温。
It is necessary to set up exhaust pipeline equipment in the clean and dust-free workshop. This equipment is very important for the dust-free workshop. It is generally stipulated to use zinc coated plate After the pavement is finished, the flame retardant
pf polyurethane foam plastic (related matter: plastic) board should be pasted for purification and heat insulation.
四、送风口的材料
4、 Material of air supply outlet
送风口分成2个一部分，一部分是它的框架结构，一般要选用不锈钢板的色泽，它是以便其牢固水平和美观大方性；也有一部分是它的冲孔网板，要选用的是喷漆铝（Al)板，都是充分考虑牢固性。
The air supply outlet is divided into two parts, one part is its frame structure. Generally, the color of stainless steel plate should be selected to ensure its firmness, level and beauty; the other part is its perforated mesh plate, which should be spray
painted aluminum (AL) plate, and the firmness should be fully considered.
昆山昌瑞空调净化技术有限公司，专注从事空气过滤器系列产品（初/中/高效、化学过滤器等）、洁净室净化设备（抛弃式/可更换式/自动卷绕式过滤器、高效送风口、FFU高效过滤器净化机组）的研发、生产、销售和售后。
Changrui Air Conditioning Purification Technology Co., Ltd. focuses on the R&D, production, sales and after-sales of air filter series products (primary/medium/high-efficiency, chemical filters, etc.) and clean room purification equipment (disposable/replaceable/automatic
winding filters, high-efficiency air supply outlets, FFU high-efficiency filter purification units).
