无菌室装修的工作规程

返回列表 来源：发布日期： 2020.11.19

1、无菌室灭菌。每次使用前开启紫外线灯照射30min以上，或在使用前30min，对内外室用5%石炭酸喷雾。
1 、 sterilization in asepsis room. Before each use open above UV lamp 30min, or prior to use 30min on the inside and outside room 5% carbolic spray.
2、用肥皂洗手后，把所需器材搬入外室；在外室换上已灭菌的工作服、工作帽和工作鞋，戴好口罩，然后用2%煤酚皂液将手浸洗2分钟。

2, after washing with soap, the equipment needed to move into the outer chamber; in the outer room for sterilized working clothes, hats and shoes, wearing masks, and then use the 2% Lysol liquid dip hands for 2 minutes.

3、将各种需用物品搬进内室清点、就位，用5%石炭酸在工作台面上方和操作员站位空间喷雾，返回外室，5～10min后再进内室工作。

3, all kinds of necessities into check and chamber in place, with 5% in the working table and carbolic spray operator station space, return to the outer chamber, 5 ~ 10min after work into the chamber.
4、接种操作前，用70%酒精棉球擦手；进行无菌操作时，动作要轻缓，尽量减少空气波动和地面扬尘。
4, before inoculation, use 70% alcohol cotton ball to wipe hands; for aseptic operation, the action should be light and slow, as far as possible to reduce air fluctuation and ground dust.
5、工作中应注意安全。如遇棉塞着火，用手紧握或用湿布包裹熄灭，切勿用嘴吹，以免扩大燃烧；如遇有菌培养物洒落或打碎有菌容器时，应用浸润5%石炭酸的抹布包裹后，并用浸润5%石炭酸的抹布擦拭台面或地面，用酒精棉球擦手后再继续操作。
5, work should pay attention to safety. In the case of cotton plug ignition, by hand or with a damp cloth wrapped out, do not blow through your mouth, in order to avoid the expansion of combustion; if there is a bacteria culture on bacteria or break the container, use carbolic cloth infiltration in 5% packages, and wipe with a cloth or table 5% carbolic infiltration ground, with rubbing alcohol hand before proceeding.
6、工作结束，立即将台面收拾干净，将不应在无菌室存放的物品和废弃物全部拿出无菌室后，对无菌室用5%石炭酸喷雾，或开紫外线灯照射30min。

6, the work is over, immediately clean up the table, will not be stored in the asepsis room of the goods and waste all out of the asepsis room, the asepsis room with 5% carbolic spray, or ultraviolet light irradiation 30min.

昆山昌瑞空调净化技术有限公司，专注从事空气过滤器系列产品（初/中/高效、化学过滤器等）、洁净室净化设备（抛弃式/可更换式/自动卷绕式过滤器、高效送风口、FFU高效过滤器净化机组）的研发、生产、销售和售后。

Changrui Air Conditioning Purification Technology Co., Ltd. focuses on the R&D, production, sales and after-sales of air filter series products (primary/medium/high-efficiency, chemical filters, etc.) and clean room purification equipment (disposable/replaceable/automatic winding filters, high-efficiency air supply outlets, FFU high-efficiency filter purification units).